Non-Ionic Emulsifier Supplier and Manufacturer

Non-Ionic Emulsifier

Non-Ionic Emulsifier oxyethylated alkyl phenol, can be used as an emulsifier and wetting agent in water-based drilling fluids.

CHARACTERISTICS AND PROPERTY

Appearance------------------------- Clear to rose-colored transparent liquid
Flash point, PMCC,°F (°C) ---------------------------------------98 (37)
Specific gravity -----------------------------------------------------1.077

APPLICATIONS

Emulsify oil in water
Prepare solids-free, low-solids brine, or saltwater emulsion drilling fluids
Disperse and emulsify lubricants such as EP LUBE in drilling fluids
Water-wet oil-soluble resins in workover and completion fluids

ADVANTAGES
Compatible with most water-based drilling fluids
Emulsifies crude oils, mineral oils, or kerosene into the water phase

LIMITATIONS
To emulsify oil into water, add 0.5-7.0 lb/bbl (1.4-20.0 kg/m3).
As a wetting agent, add 0.5-3.0 lb/bbl (1.4-8.5 kg/m3).

TOXICITY AND HANDLING

Bioassay information is available upon request. Handle as an industrial chemical, wearing protective equipment and observing the precautions as described in the Material Safety Data Sheet (MSDS).

PACKAGING AND STORAGE LIMITATIONS

To emulsify oil into water, add 0.5-7.0 lb/bbl (1.4-20.0 kg/m3). As a wetting agent, add 0.5-3.0 lb/bbl (1.4-8.5 kg/m3). TOXICITY AND HANDLING Bioassay information is available upon request. Handle as an industrial chemical, wearing protective equipment and observing the precautions as described in the Material Safety Data Sheet (MSDS). PACKAGING AND STORAGE Non-Ionic Emulsifier is packaged in 55‐gal (208‐L) drums. Store in dry, well‐ventilated area. Keep container closed. Keep away from heat, sparks and flames. Store away from incompatibles. Follow safe warehousing practices regarding palletizing, ba nding, shrink‐wrapping and/or stacking.

Our Products