Thermal Fluid Supplier and Manufacturer

Thermal Fluid

Description

The Crude oil in the fields is required to be heated for enhancing demulsification properties. Thermal fluid is used for heating the oil in the heat exchangers.

Characteristic and Property

Physical Appearance The material shall be a bright and clear liquid, free from visible impurities.
Corrosion, Copper Strip Test, as per IP-154-93/ASTM D-130-94 (3 hours Test at 100 °C)    : 1-Maximum)
Density at 15 °C, g / cc …………………………………………………………………………0.87 ± 0.02
Distillation Temperature at 10 mmHg : (Temperature converted to Atmospheric Pressure at 760 mm Hg): 
(a) Initial Boiling Point, °C ……………………………………………………………310 (Minimum)
(b) Temperature at 95% Recovery, °C …………………………………………….. 472 ± 2.

Flash point as per ASTM D – 93 Method, °C …………………………………..200 (Minimum) 
Viscosity at 37.8 °C (100 °F) as per 
ASTM Method D 2161 - 1996, Say bolt seconds ………………………………140 – 170
Note: Detailed specifications which includes performance test are available on request.

Advantages

Due to high flash point and boiling point thermal fluid gives good heating efficiency.

 Toxicity and Handling

It can be stored in closed containers away from direct sunlight at ambient temperature. During handling, direct contact with human body is to be avoided. Safety goggles and gloves are recommended for safe handling.
 
Packaging and Storage

Products can be supplied in 200 liter drums and as per buyer requirement.
This material is supplied solely for informational purposes and UNIVERSAL makes no guarantees or warranties, either expressed or implied, with respect to the accuracy or use of this data. All product warranties and guarantees shall be governed by the Standard Terms of Sale.

Our Products