Turbulence Inducer - Friction Reducer for Fresh Water Cement Slurries Supplier and Manufacturer

Turbulence Inducer - Friction Reducer for Fresh Water Cement Slurries

Description


Turbulence inducer- Friction Reducer for Fresh Water for Cement Slurries is acclaimed for its pure and effective composition. We offer this chemical in different grades and specificat laboratories, pharmaceutical & fertilizer industries for their perfect texture and precise composition. Offered at competitive prices, it is a stable compound and is packed using tamper proof material. It is extensively used in oil industry as an aid for carrying out cementation jobs.

Characteristic and Property

Physical Appearance: The Material shall be in the form of powder, free from visible impurities.
Solubility of 2 % (w/v) sample in Fresh Water at 24 ± 2 °C…………Should be completely soluble.
Moisture Content at 105 ± 2 °C percent by mass……………………10.0 (Maximum).

Performance Test :
(i)    Prepare 44% Cement Slurry by mixing API Class 'G' Oil Well Cement (HSR) conforming to VISION Specification and Fresh Water. Determine its Critical Velocity at 80°C and ambient pressure for 3" equivalent diameter (600 reading of Fann VG Meter or Equivalent not to be considered for calculation of n' and K').
Record the Critical Velocity of the neat slurry.

(ii)    Prepare 44% Cement Slurry as described at 4(i) and treat with 0.8% BWOC (Maximum) of the Turbulance Inducer Sample and determine the Critical Velocity at 80°C and atmospheric pressure for 3" equivalent diameter (600 reading of Fann VG Meter or Equivalent not to be considered for calculation of n' and K').
Critical Velocity of the treated slurry shall not be more than 50% of the value obtained for neat slurry 4(i).
Thickening Time Test :
(i)    Prepare Cement Slurry as described in 4(i) and determine the Thickening Time at 8200 psi and 100°C (raised in 34 minutes), as per Test Procedure in API Specification.
Record the thickening Time of the neat slurry.

(ii)    Prepare Cement Slurry as described in 4 (i) and treat the Slurry with 1.0% BWOC of the Turbulance Inducer Sample. Determine the Thickening Time at 8200 psi and 100 °C (raised in 34 minutes), as per Test Procedure in API Specification.
Thickening time of the treated slurry shall be more than that of the neat slurry at 5 (i).
Fluid Loss Test :
(i) Determine Fluid Loss of the Slurry, as prepared in 5 (i) at 90°C and 1000 psi.
Record the Fluid Loss of the neat slurry 5 (i).
(ii) Also determine the Fluid Loss of the neat Slurry 5 (i) treated with 1% BWOC of the Sample at 90°C and 1000 psi.
Fluid loss of the treated slurry shall not be more than 75% of the value obtained for neat slurry at 6(i).
Note: The Total Dissolved Solids (TDS) in Fresh Water shall not exceed 1000 ppm. 

Advantages

It is extensively used in oil industry as an aid for carrying out cementation jobs.

Toxicity and Handling

It can be stored in closed containers away from direct sunlight at ambient temperature. During handling, direct contact with human body is to be avoided. Safety goggles and gloves are recommended for safe handling.

Packaging and Storage

As Per Buyer Requirement
This material is supplied solely for informational purposes and UNIVERSAL makes no guarantees or warranties, either expressed or implied, with respect to the accuracy or use of this data. All product warranties and guarantees shall be governed by the Standard Terms of Sale.

Our Products