Turbulence Inducer- Friction Reducer For Sea Water Cement Slurries Supplier and Manufacturer

Turbulence Inducer- Friction Reducer For Sea Water Cement Slurries

Description

Turbulence inducer- Friction Reducer for Sea Water for Cement Slurries is acclaimed for its pure and effective composition. We offer this chemical in different grades and specifications to meet the diverse requirements of clients. This chemical is comprehensively used in oil industry, laboratories, pharmaceutical & fertilizer industries for their perfect texture and precise composition. Offered at competitive prices, it is a stable compound and is packed using tamper proof material. It is extensively used in oil industry as an aid for carrying out cementation jobs.

Characteristic and Property

Physical Appearance: The Material shall be in the form of powder, free from visible impurities.
Solubility of 2 % (w/v) sample in Sea Water at 24 ± 2°C,……………Should be completely soluble.
Moisture Content at 105 ± 2 °C percent by mass……………………10.0 (Maximum).

Performance Test :
(i)    Prepare 44% Cement Slurry by mixing API Class `G' Oil Well Cement (HSR) conforming to VISION Specification and Sea Water, by stirring in Waring Blender for 35 seconds, as per Test Procedure in API Specification. Determine its Critical Velocity for 3" equivalent diameter at 62°C, as per API Test Procedure in API Specification.
Record the Critical Velocity of the neat slurry.

(ii) Prepare 44% Cement Slurry as described at 4(i) and treat with 0.9% BWOC (Maximum) of the Sample and determine the Critical Velocity for 3" equivalent diameter at 62°C and atmospheric pressure, as per Test Procedure in API Specification.
Critical Velocity of the treated slurry shall not be more than 50% of the value obtained for neat slurry 4(i).
Thickening Time Test :
(i)    Prepare Cement Slurry as described in 4(i) and determine the thickening time at 6000 psi and 90°C (raised in 30 minutes).
Record the thickening Time of the neat slurry.

(ii)    Prepare Cement Slurry as described in 4(i) and treat the Slurry with 0.7% BWOC of the Sample. Determine the thickening time at 6000 psi and 900 graised in 30 minutes).
Thickening time of the treated slurry shall not be less than that of the neat slurry at 5(i).
Fluid Loss Test :
(i)    Determine Fluid Loss of the Slurry, as prepared in 5(i), at 62°C and 1000 psi, as per Test Procedure in API Specification. Record the Fluid Loss of the neat slurry 5 (i).

(ii)    Also determine the Fluid Loss of the neat Slurry 5(i) treated with 1% BWOC of the Sample at 62°C and 1000 psi. Fluid loss of the treated slurry shall not be more than 70% of the value obtained for neat slurry at 6(i).
Note: Representative Sample of Sea Water taken from any Mumbai High Platform, is to be used for testing, typical composition of which is given below for general guidance : 

Parameter Concentration (ppm) :
(i) Carbonates    24
(ii) Bicarbonates    110
(iii) Chloride    20,833
(iv) Sulphate    2,962
(v) Calcium    340
vi) Magnesium    1356
(vii) Sodium and Potassium (Calculated as Na)    11,988
(viii) TDS    37,613

Advantages

It is extensively used in oil industry as an aid for carrying out cementation jobs.

Toxicity and Handling

It can be stored in closed containers away from direct sunlight at ambient temperature. During handling, direct contact with human body is to be avoided. Safety goggles and gloves are recommended for safe handling.

Packaging and Storage


As Per Buyer Requirement. 
This Material is supplied solely for informational purposes and UNIVERSAL makes no guarantees or warranties, either expressed or implied, with respect to the accuracy or use of this data. All product warranties and guarantees shall be governed by the Standard Terms of Sale.

Our Products